7 Technical data
7.1 Technical data
540i XP
Motor
Type BLDC (brushless) 36V
Features
Low energy mode savE
Lubrication system
Type of oil pump Adjustable
Oil tank capacity, liter/cm
2
0.18/180
Weight
Chainsaw without battery, guide bar, saw chain and empty chain oil tank, kg 2.9
Water protection level
IPX4 Yes
Noise emissions
1
Sound power level, measured dB(A) 104
Sound power level, guaranteed L
WA
dB(A) 106
Sound levels
2
Sound pressure level at the operator's ear, measured according to EN
62841-1
95
Vibration levels
3
Front handle m/s
2
3.6
Rear handle m/s
2
3.7
Saw chain/guide bar
Recommended bar lengths, inch/cm 12-16/30-40
Usable cutting length, inch/cm 11-15/28-38
Type of drive sprocket/number of teeth 3/8"/6 (S93G), m0.325"/7 (SP21G)
Maximum chain speed / (savE), m/s 24 (18)
Radio frequency data for
Frequency band, GHz 2.4-2.4835
Output power, max dBm 0 0
7.1.1 Approved batteries and chargers
Only use Husqvarna original batteries and chargers for
this product.
Information about approved batteries and chargers is
found in the Husqvarna accessories guide.
1
Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive
2000/14/EC.
2
Reported data for sound pressure level for the machine has a typical statistical dispersion (standard deviation)
of 3 dB (A).
3
Vibration level, according to EN 62841-4-1. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s
2
. Declared vibration data from measurements when the machine is fitted with a bar
length and recommended chain type. If the machine is fitted with a different bar length, the vibration level may
vary by max ± 1.5 m/s
2
.
26 - Technical data 1430 - 001 - 05.05.2020
To Next Page
Loading...
