What to do if my Husqvarna AUTOMOWER 210 C Lawn Mower wheel motor is blocked?
If the wheel motor of your Husqvarna Lawn Mower is blocked, it's likely that grass or another object has wrapped around the drive wheel. Inspect the drive wheel and remove any obstructions.
What to do if my Husqvarna Lawn Mower blade disc is blocked?
If the blade disc on your Husqvarna Lawn Mower is blocked, grass or another object has likely become wrapped around it. Check the blade disc and clear away any obstructions.
What to do if my Husqvarna Lawn Mower is trapped?
If your Husqvarna Lawn Mower is trapped, free it and address the reason it got stuck.
What to do if my Husqvarna AUTOMOWER 210 C Lawn Mower is upside down?
If your Husqvarna Lawn Mower is upside down or leaning too much, turn it the right way up.
What to do if I entered wrong PIN code on my Husqvarna AUTOMOWER 210 C Lawn Mower?
If you've entered the wrong PIN code on your Husqvarna Lawn Mower, enter the correct PIN code. Remember that after three incorrect attempts, the keypad will be blocked for five minutes.
General| Cutting Width | 17 cm |
|---|---|
| Recommended Lawn Area | 600 m² |
| Working area capacity | 600 m² |
| Battery Type | Li-Ion |
| Battery Voltage | 18 V |
| Cutting Height | 20-50 mm |
| Sound level Measured | 58 dB(A) |
| Battery capacity | 2.1 Ah |
| Maximum incline within the working area | 25 % |
| Maximum Slope | 25 % |
| Blade Type | Pivoting razor blades |
| Rain Sensor | Yes |
| Anti-Theft System | PIN code |
| Connectivity | No |
Crucial safety guidelines for operating the Automower to prevent injury.
Outlines necessary preparations and checks before starting the installation process.
Guides on selecting a location and connecting the loop generator/charger.
Step-by-step instructions for charging the Automower's battery.
Details methods for installing the boundary wire, including stapling and burying.
Instructions for securely connecting the boundary wire to the loop generator.
Procedures to verify the loop signal and ensure the installation is correct.
Process for pairing the Automower with its charging and control station via PIN.
Comprehensive guide on how to safely start the Automower.
Step-by-step guide for safely replacing the mower's cutting blades.
Guide to interpreting fault codes displayed by the Automower's indicator lamps.
Troubleshooting common operational symptoms and their potential causes and actions.
To Next Page
