Husqvarna H130 Mark II - Service Data; Torque Specifications and Lubrication

10 - English
Key to diagrams
The figures next to parts screwed on indicate
the tightening torque Nm.
= Lubricate with two-stroke oil.
= Lubricate with chain oil.
= Lubricate with grease.
4 Service data
Service data
T30
7.0 - 9.0 Nm (1st torque)
T30
11.0 - 13.0 Nm (2nd torque)
19 mm
12.0 ~ 14.0 Nm
12.0 - 14.0 Nm
2.5 - 3.0 Nm
T25
2.2 - 3.4 Nm
1.0 - 1.5 Nm
T27
2.5 - 3.5 Nm
T272.5 - 3.5 Nm
T255.0 - 6.0 Nm
4 mm2.0 - 2.7 Nm
2.8 - 4.0 Nm
5 mm
8 mm
T25
5.6 - 6.8 Nm
3.0 - 4.0 Nm
2.5 - 3.0 Nm
4 mm
6.0 - 8.0 Nm