a) On LC 347VLi and LC 247Li: The green LED (B)
comes on.
The two bars of the battery indicator come on
and show the levels of the 2 batteries. After 2-3
seconds the battery indicator for the battery not
in operation goes off. The bar of the battery in
operation is shown for a longer time.
b) On LC 247iX, LC 347iVX and LC 353iVX: The
display comes on. The battery indicator (B)
shows the battery charge of the 2 batteries. The
number of the battery that operates is shown
adjacent to the battery indicator. The display
also shows the set speed.
6. Loosen the start inhibitor.
7. Push the motor brake handle in the direction of the
handlebar.
3.3.2 To use the drive on the wheels
• Pull the drive bail in the direction of the handlebar to
start the drive.
• Push + and - on the control panel to set the drive
speed in 4 steps.
a) On LC 347VLi:
b) On LC 347iVX and LC 353iVX:
• Release the drive bail to disengage the drive, for
example when you go near an obstacle.
10 - Prepare and do servicing on the product 361 - 001 -
To Next Page
Loading...
