10 Technical data
10.1 Technical data LC 247Li, LC 347VLi
LC 247Li LC 347VLi
Cutting motor
Motor type BLDC (brushless) 36V BLDC (brushless) 36V
Motor speed – SavE, rpm 2600 2600
Motor speed – Nominal, rpm 3000 3000
Motor speed – High load, rpm 3500 3500
Motor output – max. kW 0.96 0.96
Motor output – Nominal, kW 0.75 0.75
Drive motor
Motor output – Nominal, kW N/A 0.25
Self walk speed, km/h N/A 3.0–4.5
Speed adjustment levels N/A 4
Weight
Weight without battery, kg 24 26
Battery
2
Type of battery Husqvarna Battery Series Husqvarna Battery Series
Battery runtime
Battery runtime, min, (free run) with SavE activated, with
oneHusqvarna 5.2 Ah battery (Bli200).
43 43
Battery runtime, min, (free run) with standard mode acti-
vated, with one Husqvarna 5.2 Ah battery (Bli200).
30 30
Noise emissions
3
Sound power level, measured dB (A) 92 92
Sound power level, guaranteed L
WA
dB (A) 93 93
Sound levels
4
Sound pressure level at the operator's ear, dB (A) 79 79
Vibration levels
5
Handle, m/s
2
0.42 0.42
Cutting
Cutting height, mm 20-75 mm 20-75 mm
Cutting width, cm 47 47
Bagger capacity, litre 55 55
2
For best results and performance the Husqvarna battery BLi200 is recommended.
3
Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive
2000/14/EC.
4
Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB (A).
5
Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s
2
. Vibration
standard EN 60335-2-77:2017 chapter 20.105
361 - 001 - Technical data - 41
To Next Page
Loading...
