3 Prepare and do servicing on the product
3.1 Assembly
3.1.1 To assemble the handle
1. Loosen the lower knobs.
2. Move the knobs to the lower end of the grooves on
the left and the right side of the product.
3. Set the handle height in one of the 2 available
positions.
4. Move the knobs up in the direction of the handle
until they stop and you hear a click.
5. Tighten the knobs fully.
3.1.2 To set the product in transport position
1. Loosen the lower knobs.
2. Move the knobs to the lower end of the grooves on
the left and the right side of the product.
3. Fold the handle forward.
4. Remove the grass catcher.
6 - Prepare and do servicing on the product 361 - 001 -
To Next Page
Loading...
