3. Remove dust cover (only LC 347VLi, LC 347iVX and
LC 353iVX).
4. Attach the wheels in the opposite sequence. Use the
correct torque. Refer to
Servicing data on page 13
.
7.5 Front axle
7.5.1 To disassemble and assemble the front axle
1. Turn the product on its side. Remove the skid plate.
2. Disconnect the height adjuster.
3. Remove the wheel and axis assembly.
4. Remove the hubcap. Remove the screw. Remove
and replace the bearings.
5. Assemble the front axle in the opposite sequence.
Use the correct torque. Refer to
Servicing data on
page 13
.
361 - 001 - Repair instructions - 23
To Next Page
Loading...
