6 Function overview
6.1 Rating plate and product serial number
The product serial number is given on the rating plate.
Supply the model name and the article number when
you send an order for spare parts.
HUSQVARNA AB, SE-561 82 HUSKVARNA, SWEDEN
Husqvarna
Identity (HID) XXXXXXXXXXXXXXXXXXXXXXXXX
Product No. XXXXXXXXX Serial No. XXXXXXXXX
XX XXXXXX XX kg XX Vn XXXX rpm
20XX X.XX kW XX cm IPX1
6.2 Motor
The motor can hold 2 batteries.
6.3 Battery
WARNING: Before you use the battery, you
must read and understand the safety chapter.
You must also read and understand the
operator's manual for the battery and the battery
charger.
6.3.1 Battery status
The display shows the remaining battery capacity and if
there are problems with the battery. The battery capacity
is shown for 5 seconds after the product is switched off
or the battery indicator button is pressed. The warning
symbol on the battery is on when an error has occurred.
See
Troubleshooting schedule on page 35
.
LED lights
Battery status
All LEDs are lit Fully charged (75-100%)
LED 1, LED 2, LED 3 are
lit
The battery is 50%-75%
charged
LED 1, LED 2 are lit The battery is 25%-50%
charged
LED 1 is lit The battery is 0%-25%
charged.
LED 1 flashes The battery is empty.
Charge the battery.
6.3.2 To charge the battery
Charge the battery before the first use. The battery is
only 30% charged when supplied to the customer.
Note: The battery charger must be connected to the
voltage and frequency specified on the rating plate.
The battery does not charge if the battery temperature is
above 50°C. The battery charger decreases the
temperature of the battery before it starts to charge.
1. Connect one end of the power cord for the battery
charger into the socket of the battery charger.
2. Connect the other end of the power cord for the
battery charger in an grounded mains socket. The
LED on the battery charger flashes green one time.
3. Put the battery in the battery charger. The green
light on the charger comes on when the battery is
correctly connected to the battery charger.
4. When all LEDs on the battery have come on the
battery is fully charged. Charge the battery for
maximum 24 hours.
361 - 001 - Function overview - 19
To Next Page
Loading...
