Husqvarna LC 247Li - 3.2 Product Servicing Schedule; 3.3 Function Test - Starting the Product

3.2 Servicing schedule
Maintenance task Before use
After each
use
Every 10
hours
Every 25
hours
Product
Do a general inspection X X
Clean the product X
Examine the drive wheels X
General lubrication X
Do a check of the start inhibitor X
Make sure that the safety devices on the product are not defec-
tive
X
Examine the cutting equipment X X
Examine the cutting cover X
Do a check of the motor brake handle X
Make sure that the bail arm functions correctly
1
X
Make sure that the ON/OFF switch operates correctly X
Clean and examine grass catcher X X
Clean under the drive cover X
Accessory
Examine the battery for damage X
Do a check of the battery charge X
Make sure that the release button on the battery operates cor-
rectly and that the battery locks into the product
X
Examine the battery charger for damage and make sure that it
operates correctly
X
Examine the connections between the battery and the product X
Examine the connection between the the battery and the battery
charger
X
3.3 Function test
3.3.1 To start the product
1. Open the battery lid.
2. Put a charged battery in 1 of the battery holders. For
longer operation time, put a second charged battery
in the other battery holder.
3. Turn the safety key to 1.
4. Stay behind the product.
5. Push the ON/OFF button (A) on the control panel.
1
Only LC 347VLi.
361 - 001 - Prepare and do servicing on the product - 9