Husqvarna LC 247Li - Page 28

4. Disconnect the cable and remove the motor.
Remove the 4 sleeves, if it is necessary.
5. Remove the 12 screws and lift the motor cover.
6. Put the motor cover with the top down on a cloth to
prevent damages to the motor cover.
7. Disconnect the cable for the motor control box.
Disconnect the transmission cable. Disconnect the
cables from the top of the battery holder.
a) On LC 347VLi, LC 247Li, LC 247iX and LC
347iVX:
b) On LC 353iVX:
28 - Repair instructions 361 - 001 -