Husqvarna TE 300i US 2021 User Manual

7 COMBINATION INSTRUMENT
26
7.1 Overview
402819-10
1
Overview of indicator lamps ( p. 20) (All EU models)
1
Overview of indicator lamps ( p. 20) (All US models)
2
Left button
3
Display
4
Right button
7.2 Activation
402819-01
Activating combination instrument
The combination instrument is activated when one of the buttons
is pressed or an impulse comes from the wheel speed sensor.
7.3 Messages on the combination instrument
401901-01
Possible states
Battery voltage of the combination instrument – The
battery voltage of the combination instrument is too
low. Change combination instrument battery.
Service – A service is due. Contact an authorized
Husqvarna Motorcycles workshop.
7.4 Adjusting the combination instrument
Condition
The motorcycle is stationary.
401909-01
– Press both buttons for 3–5 seconds.
The Setup menu is displayed. The UNIT display flashes.
– Press one of the buttons to select UNIT for the speed in kilo-
meters KM/H or miles M/H.

Husqvarna TE 300i US 2021 Specifications

General

Displacement	293.2 cc
Bore	72 mm
Stroke	72 mm
Transmission	6-speed
Seat Height	950 mm
Front Brake	260 mm disc
Starting System	Electric Start
Ground Clearance	370 mm
Engine Type	2-stroke single cylinder
Front Suspension	WP Xplor 48 mm fork
Rear Brake	220 mm disc
Frame	Chromium molybdenum steel
Wheelbase	1485 mm
Fuel System	Electronic Fuel Injection