SECTION 3
Pr.7.6 Total. Reset Relay Hours/Starts Totaliser Reset (D = No)
Option displayed Description
7.6.1 Totaliser Reset No No effect on totaliser
7.6.2 Totaliser Reset Yes Resets the totaliser to 0
To clear the totalisers select the following:
7.6.2 Totaliser Reset Yes
The following messages “Totaliser reset” then “Totaliser stored” appear on the screen.
Note
1. Pr. 7.6 will never display (Yes) even after the totaliser is reset.
Ref: MINIFLEX LR MANUAL Rev. 0 23
To Next Page
Loading...
