Hycontrol MINIFLEX LR User Manual

APPENDIX 3
Installation Instructions for ATEX Transducer in Hazardous Area
For transceiver installation refer to Page 2.
HAZARDOUS AREA
Maximum
separation of
300m
SAFE AREA
Miniflex LR
Transceiver
Transducer
Installation must be in accordance with the applicable codes of practice and harmonised
standards for EEx m (encapsulated) equipment.
The transducer must be driven only by the Miniflex LR transceiver.
The transceiver must always be installed in a safe area.
User repairs are not permitted; in case of faults return the unit to Hycontrol.
Periodically clean the radiating face only with clean water, and inspect the body and wiring
for damage.
Ref: MINIFLEX LR MANUAL Rev. 0 54

Hycontrol MINIFLEX LR Specifications

General

Brand	Hycontrol
Model	MINIFLEX LR
Category	Controller
Language	English