M-16 / M-20
Dear Customer,
As a businessman you understand the necessity of keeping the cost of each step of production to an
absolute minimum without sacrificing quality. In the purchase of any new piece of equipment you are looking to
increase your production and consequently reduce your cost, while maintaining or improving quality.
With these points clearly in mind we have designed the HYD-MECH M-16 / M-20. Our goal is to change
stock cutoff from a "necessary evil" to a money making and time saving part of your operation.
Please use this manual to familiarize yourself and your employees on the proper operation and
maintenance of the M-16 / M-20.
We appreciate the confidence you have shown in our product and wish you every success in its use.
Sincerely, Stan Jasinski, P. Eng.,
HYD-MECH ENGINEERING LTD.
Founder
HYD-MECH GROUP
1079 Parkinson Road Phone: (519) 539-6341
P.O. BOX 1087 Fax: (519) 539-5126
Woodstock, Ontario e-mail: hydmech@oxford.net
N4S 8P6
Published 1/99
To Next Page
Loading...
Need help?
General