Pg 2.14
Hydraulic Feed Control
Fast Approach Lever
Depress for fast head descent.
Feed Force Knob
Used to set Feed Force Limit (counterclockwise
rotation to increase and clockwise rotation to
decrease).
Feed Rate Knob
Used to set Feed Rate (counterclockwise rotation to
increase and clockwise rotation to decrease).
HYDRAHYDRA
HYDRAHYDRA
HYDRA
ULIC FEED CONTROLULIC FEED CONTROL
ULIC FEED CONTROLULIC FEED CONTROL
ULIC FEED CONTROL
The Hydraulic Feed Control is located adjacent to the drive wheel box. These controls allow
independent control of Feed Force and Feed Rate.
To Next Page