What causes Evaporator temp Sensor failure in Hydro-Pro Hydro-Pro+Premium 7?
An evaporator temperature sensor failure in your Hydro-Pro Heat Pump is generally caused by the evaporator temperature sensor being open or short circuit. The suggested solution is to check or replace the evaporator temperature sensor.
Details performance specifications for different Hydro-Pro+premium models, including heating capacity and power input.
Discusses optimal placement of the unit considering air circulation, electricity, and piping.
Details plumbing requirements, pipe types, and connection points for the unit.
Covers electrical connection requirements, junction box setup, and disconnect means.
Details how to start/shut down, switch modes, set temperature, set clock, set timer, and lock keyboard.
Describes how malfunction codes are displayed and where to find solutions.
Lists common malfunctions, their display codes, causes, and solutions for troubleshooting.
To Next Page
General
