EN-GB - 11HYENA E-BIKE SYSTEMS
5.7. Turning on/o the lights (if part of the equipment)
With the system turned on, press and hold the UP (+) button for two seconds to turn the
lights on or o (if the front and rear lights are powered by the assist system).
• If the charge indicator is ashing (at < 9% charge), the battery is almost empty.
Charge the battery.
• At 4% charge, the riding support will stop. The remaining charge is reserved to power
lights (if part of the equipment) for up to two hours.
> 2 secs
Note
If your battery is empty, the lighting on your e-bike may not
work until the battery is recharged.
To Next Page
Loading...