HPR400XD Auto Gas – 806160 3
Changed Page Description of change for revision 2 (date of revision - 9/2011)
5-36 Added a second note about following the troubleshooting steps in order.
5-43 Updated the Gas Leak Test screen shot
5-67 and 5-68
Updated the Service Parts Replacement Schedule table. Corrected the part number for the annual
preventive maintenance kit (it was 228015 and was changed to 228605). Corrected the part
number for the torch main body (it was 220162 and was changed to 220706).
6-2 Added part numbers for power supplies with Hypernet and a note about Hypernet.
6-5 Updated the part numbers for the control transformers.
6-17
Added part numbers to Consumables for mirror image cutting for 80 amp, 130 amp and 260 amp
mild steel bevel cutting.
Schematics All sheets updated from revision C to revision E.
Appendix A Updated to the latest information and formatting for the Hypertherm torch coolant data (MSDS)
Appendix B
Added the secondary error code ID numbers after the primary error code ID number, for all
applicable error codes.
b-6 Added information to the description of the “HELLO” command.
b-19 Added command numbers 136 and 158 to th ecommand table.
b-21 Added error code number 11.
b-24 Added error code numbers 161, 182, and 383.
Appendix C Updated TOC to include new items.
C-2 Added metric conversions for gas lead lengths. Added graphic of the ohmic contact extension.
C-3
Added graphics for the rotational mounting sleeve, the rotational mounting sleeve clamp, the
leather over wrap, and the robotic teaching torch. Also added a dimensional drawing for the torch
and rotational mounting sleeve.
To Next Page
Loading...
Need help?
General
