Hypertherm powermax 350 - PAC110 Torch; Figure 2-2 PAC110 Torch with Dimensions; Illustrations

S PECIFICATIONS
2-3
Operator Manual
Work
Lead
PAC110
Torch
Power
Cord
Powermax350
Figure 2-1 Powermax350 Plasma Cutting System
PAC110 Torch
Recommended Cutting Capacity ..................................1/4 inch (6 mm) @ 25A (35% duty cycle)
Maximum Cutting Capacity ...........................................3/8 inch (10 mm) @ 25A (35% duty cycle)
Severance Cutting Capacity..........................................1/2 inch (12 mm) @ 25A (35% duty cycle)
Gas Flow .......................................................................270 scfh/4.5 scfm at 60 psi (127 l/min at
4.1 bar)
Weight ...........................................................................3 pounds (1.4 kg)
Figure 2-2 PAC110 Torch with Dimensions