Hypertherm SYNC Powermax 85 User Manual

Troubleshoot Common Problems
6
Powermax65/85/105 SYNC Operator Manual 810470 155
MFG – This field shows the manufacture date of the Hypertherm cartridge in year-month-day format
(YYYY-MM-DD) followed by the manufacture identification number (.nn) and the manufacture
location code (@nn).
UID – This field shows the unique identification number of the Hypertherm cartridge.
STA – This field shows the total number of pilot arc starts that the Hypertherm cartridge has done in
its life.
XFR – This field shows the total number of arc transfers that the Hypertherm cartridge has done in
its life.
PT – This field shows the cumulative pilot arc time in hours, minutes, and seconds (HH:MM:SS)
that the Hypertherm cartridge has had in its life.
XT – This field shows the cumulative arc transfer time in hours, minutes, and
seconds (HH:MM:SS) that the Hypertherm cartridge has had in its life.
F0, F1, F2, F3 – These fields show the 4 most recent operational fault codes that occurred while
cutting or gouging with the cartridge. Operational fault codes are in the format 0-nn-n. Refer
to page 130.
To see these fields, scroll down to the CARTRIDGE DATA 2 screen.

Hypertherm SYNC Powermax 85 Specifications

General

Brand	Hypertherm
Model	SYNC Powermax 85
Category	Welding System
Language	English