Hypertherm SYNC Powermax 85 User Manual

Complete Regular Maintenance Tasks
7
174 810470 Operator Manual Powermax65/85/105 SYNC
5. Put the filter element inside the air filter bowl. Push down on the top plastic fitting until you hear
a click.
Install the air filter bowl and filter element
1. Vertically align the filter bowl and push it up into the
receptacle in the rear panel.
2. Turn the filter bowl 45 degrees to the left until you hear
a click.
3. Reconnect the gas supply to the rear of the plasma
power supply.
4. Reconnect the power cord.

Hypertherm SYNC Powermax 85 Specifications

General

Brand	Hypertherm
Model	SYNC Powermax 85
Category	Welding System
Language	English