14
Machine Installation
The G10 Mini does not require assembly, however some consid-
eration needs to be given to installation. The G10 Mini includes a
docking plate, and certain surfaces may require use of this dock
(see Fig. 2).
The G10 Mini has rubber suction cap feet that are best suited to
hard at surfaces such as:
• Polished concrete
• Timber oors
• Tiled oors
If you have any of the following surfaces, the suction cap feet may
not make a solid bond, and the docking plate may be required:
• Carpeted surfaces
• Textured surfaces
You may also wish to install the docking plate on any of the above
surfaces simply to protect the surface from marks that may be left
by the black rubber feet.
To Next Page
Loading...