38
Troubleshooting
PROBLEM SOLUTION
There is no power to the LCD
display.
Check the power lead is pushed
rmly into power socket at rear
of machine.
Turn the power o and then
back on again at the main pow-
er switch
If there is no light at the power
switch on the rear of the ma-
chine, change the fuse (spare
fuse is supplied inside fuse
holder in mains socket).
The machine is moving on the
oor at higher frequency.
Ensure the machine is on a rm
stable surface.
Install the machine onto the
docking plate.
The platform won’t move and I
can hear the motor running, or
there is a squealing sound.
The internal fan belt may require
adjustment, please contact Hy-
perVibe.
To Next Page
Loading...