Hytera PD375 - Call on Analog Channel (Without Signaling); Features and Operations; Home Screen; Contact

10
Call Services
Step Radio A Radio B
4 / Radio B can receive
the call without any
operation. When
receiving, the LED
indicator glows green
and the radio
the icon .
Radio B can hold
down the
PTT
key
to talk when the
LED indicator glows
orange and the radio
displays the icon
.
5 Radio A can receive the call without any
operation. When receiving, the LED
indicator glows green and the radio
displays the icon
.
Radio A can hold down the
PTT
key to talk
when the LED indicator glows orange and
the radio displays the icon
.
/
6 Repeat Step 4 and 5 to communicate. If no party talks before the
call hang time expires, the call will end.
●
If you do not respond to it, the radio will provide
appropriate indications.
●
The duration of LED indicator glowing orange (Call
Hang Time) is preset by your dealer. If neither party
talks before this duration expires, the call will end.
Note
Call on Ana
log Chann
el (Without Signaling)
On the analog channel without signaling, hold down the
PTT
key and talk
to make a call to all the users on the channel. Then release the
PTT
key
to receive.
Features and Operations
Home Screen
The feature allows the radio to return to the home screen directly.
To return to the home screen directly, press
.
Contact
You can manage the contacts via the “Contact” menu.
Contact List
The Contact List is used to save Private Call/Group Call/All Call contacts
information which is preset by the dealer.
You can access the “Contact List” menu in the following ways:
●
Press
OK/Menu
key and go to “Contact -> Contact List”.
●
Press the programmed
Contact List
key.
●
Press
.
Favorites
Favorites allows you to add the frequently used contacts from Contact
List.