14
Transmission Management
If you hold down the
PTT
key while the channel is in use, your radio
will keep beeping, alerting you to transmission prohibition. It can be
programmed via the CPS.
TX Admit on digital channel includes the followings:
●
Always Allow: You can hold down the
PTT
key to transmit all the time,
no matter whether the channel is being interfered or not.
●
Channel Free: The radio is allowed to transmit when t
he channel is
not being interfered.
●
Color Code Free: The radio can transmit only when the channel is not
being interfered or the color code is not matched.
TX Admit on analog channel includes the followings:
●
Always Allow: You can hold down the
PTT
key to transmit all the time,
no matter whether the channel is being interfered or not.
●
Channel Free: The radio is allowed to transmit when the ch
annel is
not being interfered.
●
CTCSS/CDCSS Match: The radio is allowed to transmit when
CTCSS/CDCSS is matched.
●
CTCSS/CDCSS Mismatch: The radio is allowed to transmit when
CTCSS/CDCSS is mismatched.
Monitor
This feature allows the radio to receive the weak signals in order to
monitor the radio.
●
Press the programmed
Monitor
key to enable the feature, then
the radio displays the icon ; press this key again to disable the
feature.
Features and Operations
●
Hold down the programmed
Monitor Momentary
key to enable
the feature, then the radio displays the icon ; release this key to
disable the feature.
Squelch Off Momentary
With the Squelch Off Momentary feature enabled, your radio’s speaker
will keep unmuted no matter whether carrier is present.
Hold down the programmed Squelch Off Momentary key to enable the
feature (a high-pitched tone sounds), then the radio displays the icon
and sounds background noise. Then release the key to exit.
To Next Page
Loading...
