11
Features and Operations
You can add or delete a contact in the “Favorite Contact” menu.
Message
Press the
OK/Menu
key and go to the “Message” menu. You can send
the Quick Text message directly. In the inbox, you can reply, forward or
delete the text message, and in the outbox you can also resend, forward
or delete the message.
Quick Text
The radio supports a maximum of 10 Quick Text messages programmed
by your dealer. You can select a Quick Text message and send it directly.
Inbox
The Inbox saves the received messages and marks each message with
a corresponding icon to indicate its status.
●
:
Read message.
●
:
Unread message.
The inbox can save up to 10 received messages. When the Inbox is
full, the radio will display the icon
!
, and the earliest message will be
overwritten by the latest one automatically.
Outbox
The radio saves the received messages into the Inbox.
The Outbox can save up to 10 sent messages. When the OutBox is full,
the earliest message will be overwritten by the latest one automatically.
Call Log
The radio keeps track of all recent outgoing, incoming and missed private
calls only. It can store up to 10 call logs. When the Call Log is full, the
earliest call log will be overwritten by the latest one automatically.
To access Call Log menu, delete call logs or hold down the
PTT
key to
initiate a call, do as follows:
●
Press the
OK/Menu
key and select the “Call Log” menu.
●
Press the programmed
Call Log
key.
T
o delete all entries in the Outgoing/Incoming/Missed list at a time, select
“Call Logs -> Outgoing/Incoming/Missed -> Delete All”.
Scan
The Scan feature allows you to listen to communication activities on other
channels so that you can keep a close track of your team members.
You can press the
OK/Menu
key and go to “Menu -> Scan -> Scan On/
Off” to enable or disable this feature, or go to “Menu -> Scan -> Scan
List” to view or select a scan list.
In the home screen, you can press the programmed
Scan
key to enable
the Scan feature. Or switch to a channel on which the Auto Scan feature
is enabled via the CPS to enable the Scan feature.
After the feature is enabled, the radio will scan all the channels in the
scan list set for the channel on which scanning starts. The scanning
process is as follows:
●
Duri
ng scanning, the radio displays the icon on the LCD, and the
LED indicator flashes orange slowly.
To Next Page
Loading...
