‐
2. Disassembly and Assembly
This section is designed to introduce the way to disassemble the radio. To assemble the radio, do vice
versa.
Caution
Position the waterproof ring into the radio properly during reassembly.
After reassembling, check the waterproof performance of the radio using the specific waterproof
test instrument of the Company.
Step 1 Remove the battery.
Step 2 Remove the antenna, Channel Selector knob and Power On-Off/Volume Control knob.
Step 3 Remove the nuts from the antenna connector, Channel Selector knob and Power
On-Off/Volume Control knob.
To Next Page
Loading...
