16
LED Indication Charging Status
The LED flashes red slowly. Standby (no load)
The LED glows red. Charging
The LED glows orange. 90% charged
The LED glows green. Fully charged
The LED flashes red rapidly. Charging failure
5.2 Assembling Accessories
5.2.1
Assembling the Antenna
Turn the antenna clockwise to fasten it. To remove the antenna, rotate it counter-clockwise.
5.2.2 Assembling the Battery
Step 1 Attach the battery as ① shows in the following figure.
Step 2 Slightly press the bottom of the battery until a click is heard. See ② in the following figure.
To remove the battery, turn off the radio first. Then slide the battery latch upwards (as ② shows) to
To Next Page
Loading...
