27
8.19.2 Auto Priority Interrupt
The Auto Priority Interrupt is enabled by the dealer and it includes four categories as introduced below.
This feature is designed to ensure the priority given to the specified services. Such services will trigger
the interruption automatically.
Emergency Priority Interrupt
This function is designed for users to initiate an emergency alarm in time. Carrying this function would
interrupt the active call on the current channel through an emergency alarm. To carry out the function,
any of the following ways is available:
Press the programmed Emergency On key.
Hold the PTT key in Emergency mode.
Auto Emergency Call
Call Back Priority Interrupt
With the feature enabled, you can hold the PTT key to interrupt a receiving call and call back. For
example, User A is receiving a call from User B. This function allows User A to interrupt the call and talk
back to User B by holding the PTT key.
Radio Disable Priority Interrupt
During a call on the channel, this function allows you to interrupt the ongoing call and have the priority to
sending a Radio Disable command. The disabled radio can be monitored remotely, but its other features
will be invalid. It can only be revived by reprogramming through the programming software or through
the Revive command.
All Call Priority Interrupt
During a call on the channel, this function allows you to interrupt the ongoing call and transmit an all call.
8.20 Scrambler /Encrypt
This Encrypt feature can encrypt your audio signals to prevent eavesdropping. Thus privacy of your
communication is guaranteed.
Operation:
Press the programmed Scramble/Encrypt key to enable the Scrambler or Encrypt feature on the
current channel (a high-pitched tone sounds); press the key again to disable the feature (a
low-pitched tone sounds).
If the Scrambler or Encrypt feature is enabled for a channel via the programming software, switch to
the channel and the feature will be enabled automatically. When you exit the channel, the feature will
be disabled.
To Next Page
Loading...
