Hytera RD98X series - Post-Installation Checklist; Status Indications - LCD; LCD Icons; Status Icons

10
Post-Installation Checklist
After the repeater has been mechanically installed and all
electrical connections have been made, power may now
be applied and the repeater should be checked for proper
operation.
1. Applying Power
Before applying power to the repeater, make sure all
boards are securely seated in the appropriate connectors
on the rear panel and all RF cable s ar e securel y
connected.
Turn on the DC power source to supply power to the
repeater.
2. Verifying Proper Operation
Operation of the repeater can be indicated by the 8 LEDs
located on the front panel and also by LCD prompts.
Caution: Some repeater components can become
extremely hot during operation. Turn off all power
and wait until the repeater is sufficiently cool before
touching the repeater.
Status Indications
LCD Icons
The LCD of your repeater displays the repeater status and
menu items. The following are the icons that appear on
the display.
Standby Screen
●
Status Icons
●
Icon Name Icon Repeater Status
Transmit Low TX power for the current channel
Power Icons High TX power for the current channel
状态图标（发射功率级别 ）
中转模式
信道别名（由经销商编程设定 ）
Status Icon (TX Power )
Repeater Mode
Channel Alias (programmable
by dealer)