Hytera RD98X series - Status Indications - LED Indicator; LED Indicator

11
LED Indicator Repeater Status
Power Indicator
glows green
Repeater being turned on
Alarm Indicator glows
red
Repeater giving an alarm due to
failure of some component (please
observe the LCD prompt, and carry
out troubleshooting as the “Alarm
Information” section instructed.)
Repeater Mode
Indicator glows green
Repeater operating in Repeater
Mode (RM)
Repeater Mode
Indicator is not lit
Repeater operating in Repeater
Base Mode (RBM)
Slot 1 TX Indicator
glows red
Repeater transmitting (analog)
/ repeater transmitting on slot 1
(digital)
Slot 1 TX Indicator
ashes red
Busy channel lockout * /
transmission time-out *
Slot 2 TX Indicator
glows red
Repeater transmitting on slot 2
(digital)
Slot 2 TX Indicator
ashes red
Busy channel lockout * /
transmission time-out *
LED Indicator
Status Indications
Slot 1 RX Indicator
glows green
Repeater receiving (analog) /
repeater receiving on slot 1 (digital)
Slot 1 RX Indicator
ashes green
Monitoring *
Slot 2 RX Indicator
glows green
Repeater receiving on slot 2
(digital)
Analog Mode
Indicator glows yellow
Repeater operating in analog
mode
Digital Mode Indicator
glows blue
Repeater operating in digital mode