IAI X-SEL Series - K Type

10
(2) K type
Note) One ProfiBus-DP board occupies two slots. Accordingly, Nos. 4 and 5 are set to “-1,” and No. 11 to “0,”
when a ProfiBus-DP board is set in the slots denoted by A above. If a ProfiBus-DP board is set in the
slots denoted by B, Nos. 8 and 9 are set to “-1,” while No. 13 is set to “0.”
Parameter No. 2
No. 3
No. 10
Parameter No. 4
No. 5
No. 11
Parameter No. 6
No. 7
No. 12
Parameter No. 8
No. 9
No. 13