IBA Com-L2B-4-8 User Manual

ibaCom-L2B-x-8 Manual
Issue 3.2 13
7 Windows XP Driver installation
The ibaCom-L2B-x-8 cards comply with the Plug & Play standard of Windows.
After the card has been plugged in for the first time and after Windows has finished its
startup after booting the Found New Hardware Wizard pops up for introduction to the
installation of the drivers. In case the dialog should not open use the Windows “Add
Hardware Wizard” in the control panel in order to look for new hardware.
If the dialog appears select “No, not this time“. Continue with <Next>.
In the next step select the option “Install the software automatically“ and click on
<Next>.

IBA Com-L2B-4-8 Specifications

General

Brand	IBA
Model	Com-L2B-4-8
Category	Computer Hardware
Language	English