Need help?Do you have a question about the IBA ibaFOB-io-Dexp and is the answer not in the manual?
General| Manufacturer | IBA |
|---|---|
| Model | ibaFOB-io-Dexp |
| Category | Computer Hardware |
| Fieldbus | PROFIBUS DP |
| PROFIBUS DP Interface | Yes |
| Interface | PROFIBUS DP |
| Voltage Range | 24V DC |
| Connector Type | Screw Terminal |
| Protocol | PROFIBUS DP |
| Type | Fieldbus I/O Module |
Defines the intended professional audience for the manual.
Explains the various notations employed within the document.
Details the meaning of danger, warning, and caution symbols.
Explains the use of notes, important notes, and tips.
Specifies the authorized uses and environments for the device.
Outlines the standard installation requirements for the board.
Provides critical safety information for handling the device.
Lists the necessary hardware specifications for the system.
Details the required software versions for operation.
Provides an overview of the board's general use and features.
Lists the technical characteristics and features of the board.
Details the different operational modes, link speeds, and sampling times.
Describes the available extension modules and their connection.
Illustrates the front panel components and board identification labels.
Details connectors for PCI and PCI Express boards.
Explains the meaning of the LEDs indicating fiber optic link status.
Describes the information displayed by the 7-segment display.
Explains the function of the debug LED for service purposes.
Details the LEDs indicating the status of output signals on extension modules.
Outlines essential safety measures before mounting or dismounting.
Provides step-by-step instructions for installing the board.
Details the steps for safely removing the board from the PC.
Explains how to connect the ibaFOB-40-D extension module.
Details how to configure the board settings within ibaPDA.
Explains how to view board details and manage firmware.
Displays detailed information for 32 Mbit links.
Shows specific information for 3/2 Mbit links.
Presents detailed information for 5 Mbit links.
Details information specific to 32Mbit Flex links.
Explains how to set up mirror mode for Flex devices.
Describes how to calculate data size in 32Mbit Flex rings.
Introduces the concept and purpose of output modules.
Details the process of configuring output links and modules.
Explains the available output modules and their usage in 3Mbit mode.
Describes output module configuration for 32Mbit Flex mode.
Provides crucial details about board synchronization.
Outlines the steps for connecting multiple boards via sync cable.
Demonstrates data acquisition setup with 3Mbit mode.
Shows system integration using 32Mbit mode and ibaPDA.
Illustrates integration with ibaPADU-S-IT.
Demonstrates system setup using the 32Mbit Flex protocol.
Shows how to use ibaFOB-D for process control with ibaLogic.
Explains data concentration using ibaBM-COL-8i-o.
Details distribution and concentration of signals using specific devices.
Describes transmitting signals to ibaPADU-8-0 devices in output mode.
Explains data transfer rates and sampling for the Flex protocol.
Details the optional installation of the ibaFOB-D network adapter.
Describes IP address assignment for devices in the Flex network.
Provides key specifications for ibaFOB-D and ibaFOB-Dexp boards.
Lists specifications for ibaFOB-40-D extension modules.
Provides dimensional drawings for PCI boards.
Shows dimensions for PCI Express boards HW version A.
Displays dimensions for PCI Express boards HW version B.
Provides contact information for technical support.
Lists contact details for iba AG headquarters and shipping.
To Next Page
