1.3 Used symbols
If safety instructions or other notes are used in this manual, they mean:
-observance of this safety information may result in an imminent risk of death
• By an electric shock!
• Due to the improper handling of software products which are coupled to input and
output procedures with control function!
-
observance of this safety information may result in a potential risk of death or
severe injury!
-
observance of this safety information may result in a potential risk of injury or
material damage!
note specifies special requirements or actions to be observed.
Important note
Note if some special features must be observed, for example exceptions from the rule.
Tip
Tip or example as a helpful note or insider tip to make the work a little bit
easier.
Other documentation
Reference to additional documentation or further reading.
To Next Page
Loading...