1 Introduction
Your iBaby monitor combines a high-quality digital camera with network connectivity and
a clear image to your iPod Touch, iPhone or iPad, or to a PC. You can connect from a
Local Area Network or over the Internet.
1.1 Package contents
! Camera
! User manual and utility CD
! Power adapter
! Bracket
! Cable
! Antenna
! Quick installation guide
! Set of screws
1.2 Function and Features
! Supports 802.11b/g/n protocols for wireless monitoring.
! Supports TCP/IP network protocols with a built-in Web server. Users can view
streaming video from an iBaby Monitor using an iPod Touch, iPhone or iPad, as well
as from a PC running Internet Explorer or similar browsers.
! A built-in microphone allows users to listen to the room being monitored. Users can
also connect the camera to a speaker to support a two-way intercom.
! The iBaby monitor's pan/tilt function allows horizontal panning of 350°and vertical
movement of 70°.
! The design is attractive and the device is easy to install and use.
! Infrared LED for night vision covers 16 feet (5 meters) of area, for 24-hour monitoring,
even in the dark.
! Motion detection, sound detection and alert pins can be connected to external
sensors for warnings.
! A record of alarms can be sent via email, and also stored on a server.
! Supports Universal Plug and Play (UPnP), allowing for automatic router port
forwarding.
! A Dynamic Domain Name Service (DDNS) address provided with the camera, with an
easy-to-read label at the bottom of each unit, allowing users to monitor their iBaby
monitor over the Web.
To Next Page
Loading...
