IBASE Technology IB891 - Page 57

APPENDIX
IB891 User’s Manual 53
bBuf = Get_W627UHG_Reg(0xF5);
bBuf &= (~0x08);
Set_W627UHG_Reg(0xF5, bBuf); .......................................................... //count mode is second
Set_W627UHG_Reg(0xF6, NewInterval);................................................................... //set timer
}
//---------------------------------------------------------------------------
void WDTDisable(void)
{
Set_W627UHG_LD(0x08); ..........................................................................................................
Set_W627UHG_Reg(0xF6, 0x00); ........................................................... //clear watchdog timer
Set_W627UHG_Reg(0x30, 0x00); ...............................................................................................
}
//---------------------------------------------------------------------------