Transferring the UPS between modes
Transferring between modes includes:
v Transferring from Normal to Bypass mode
v Transferring from Bypass to Normal mode
Transferring from Normal to Bypass Mode
To transfer from Normal to Bypass mode, complete the following steps:
1. From the main menu, press the down ( ) button to scroll to the Control menu,
and press the OK button.
2. Press the down (
) button to scroll to Go to Bypass, and press the OK button.
The text on the screen changes to Manual Bypass Command Sent.
Transferring from Bypass to Normal Mode
To transfer from Bypass to Normal mode, complete the following steps:
1. From the main menu, press the down ( ) button to scroll to the Control menu,
and press the OK button.
2. Press the down (
) button to scroll to Go to Normal, and press the OK button.
The text on the screen changes to Normal Mode Command Sent.
Chapter 3. Operating the uninterruptible power supply 35
To Next Page
Loading...
