66 Multi–Platform Interface Feature Operation Guide
printer ID.
RMT1 LUTYPE3,BUFSIZE=3840,LINE=1,NUMRD=0,NUMPR=1,NOCOMP,
NOCMPCT,SETUPHDR,CONSOLE (SETUPHDR=PDIR JES2 V3)
R1.PR1 CLASS=A,NOSEP,PRWIDTH=132,NOFCBLOD,WS=(W,R,Q,PMD,LIM,
F,T/C,P),CKPTPAGE=30
DESTID NAME=P64XX,DEST=R1
Step 4 – Define to CICS or another
application program
Refer to the vendor documentation for
defining a DSE printer to the program for its
use. Host system commands to change
printer settings are not supported in DSE
mode.
Step 5 – Printer Settings
Since the host controls are not supported,
the printer settings for CPI, LPI, and others
should be set at the printer. (See User’s
Guide beginning on page 8-14)
To Next Page
Loading...
