EasyManuals Logo

IBM A10 Series User Manual

IBM A10 Series
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
Figure 39. Installing a riser card
c. Press the card all the way into the slot. Make sure that the gold ngers are fully engaged.
d. Align the riser bracket with the rear chassis and press it down until it is secured to the chassis as
shown in the following gure.
Figure 40. Installing a riser card to the chassis
e. 5. Re-connect necessary cables to the ports of the card.
Replacing the CMOS Battery
If the server no longer automatically displays the correct date and time, you many need to replace the
battery that provides power to the real-time clock.
CAUTION:
The battery contains lithium. To avoid possible explosion, do not burn or charge the
battery. A risk of re exists if the battery is not properly handled or discarded properly.
To reduce the risk of personal injury: do not expose the battery to temperatures higher than 60°C
(140°F) and do not dissemble, crush, puncture, short external contacts, or dispose of in re or
water.
Chapter 6. Maintain the appliance 33

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM A10 Series and is the answer not in the manual?

IBM A10 Series Specifications

General IconGeneral
BrandIBM
ModelA10 Series
CategoryStorage
LanguageEnglish

Related product manuals