Check Procedures 2-23
Table 2- 2 Error Symptoms List
Error Symptoms Action/FRU
NOTE:
To diagnose a problem, first find the error symptom in the left
column. If directed to a check procedure, replace the FRU indicated in the
check procedure. If no check procedure is indicated, the first Action/FRU
listed in right column is the most likely cause.
Executing software shutdown
from Windows98 Start
menu cannot turn off
system. (Only pressing
power switch can force
system to turn off).
Load default settings.
Reload software from Recovery CD.
No system power, or power
supply fan is not running.
"Power Supply" on page 2-37.
System board.
On 2139 make sure JPX2 is installed. (near
CN1)
Other Problems
Any other problems. “Undetermined Problems” on page 2-42.
To Next Page
Loading...
Need help?
General
