Notice VII
To Connect To Disconnect
1. Turn Everything OFF. 1. Turn Everything OFF.
2. First, attach all cables to devices. 2. First, remove power cord(s) from
outlet
3.
Attach signal cables to receptacles. 3. Remove signal cables from
receptacles.
4.
Attach power cord(s) to outlet. 4. Remove all cables from devices.
5. Turn device ON
NOTE: In the UK, by law, the
telephone cable must be connected
after the power cord.
NOTE: In the UK, the power cord
must be disconnected after the
telephone cable.
To Next Page
Loading...
Need help?
General
