137Figure 91. Initialize Device Parameters command (91h)
..........................
136Figure 90. Idle Immediate command (E1h/95h)
.................................
135Figure 89. Idle command (E3h/97h)
.........................................
134Figure 88. Identify Device DMA command (EEh)
...............................
133Figure 87. Number of cylinders/heads/sectors by model number
....................
132Figure 86. Identify device information (7 of 7)
..................................
131Figure 86. Identify device information (6 of 7)
..................................
130Figure 86. Identify device information (5 of 7)
..................................
129Figure 86. Identify device information (4 of 7)
..................................
128Figure 86. Identify device information (3 of 7)
..................................
127Figure 86. Identify device information (2 of 7)
..................................
126Figure 86. Identify device information (1 of 7)
..................................
125Figure 85. Identify Device command (ECh)
....................................
123Figure 84. Format Unit command (F7h)
.......................................
121Figure 83. Format Track command (50h)
.....................................
120Figure 82. Flush Cache command (E7h)
......................................
119Figure 81. Execute Device Diagnostic command (90h)
...........................
118Figure 80. Enable/Disable Delayed Write command (FAh)
........................
117Figure 79. DCO error information definition
....................................
116Figure 78. Device Configuration Overlay Data structure
..........................
114Figure 77. Device Configuration Overlay Features register values
...................
114Figure 76. Device Configuration Overlay (B1h)
.................................
113Figure 75. Check Power Mode command (E5h/98h)
.............................
111Figure 74. Command Set (Subcommand)
.....................................
110Figure 73. Command set (2 of 2)
...........................................
109Figure 73. Command set (1 of 2)
............................................
99Figure 72. Seek overlap
...................................................
97Figure 71. Device address map before and after Set Feature
.......................
96Figure 70. Set Max security mode transition
....................................
95Figure 69. Set Max SET PASSWORD data content
...............................
93Figure 68. Command table for device lock operation (2 of 2)
........................
92Figure 68. Command table for device lock operation (1 of 2)
........................
91Figure 67. Password lost
..................................................
90Figure 66. Usual operation
.................................................
89Figure 65. Initial setting
....................................................
84Figure 64. Power conditions
................................................
81Figure 63. Device behavior by ATA commands.
.................................
80Figure 62. Reset error register values
.........................................
79Figure 61. Diagnostic Codes
................................................
79Figure 60. Default Register Values
...........................................
78Figure 59. Reset response table
.............................................
76Figure 58. Status Register
.................................................
75Figure 57. Error Register
..................................................
74Figure 56. Device/Head Register
............................................
73Figure 55. Device Control Register
...........................................
72Figure 54. Alternate Status Register
..........................................
71Figure 53. Register Set
....................................................
63Figure 52. I/O address map
................................................
62Figure 51. Drive address setting
.............................................
61Figure 50. Ultra DMA cycle timings (Host Terminating Write)
........................
60Figure 49. Ultra DMA cycle timings (Device Terminating Write)
......................
59Figure 48. Ultra DMA cycle timings (Device Pausing Write)
.........................
58Figure 47. Ultra DMA cycle timings (Initiating Write)
..............................
57Figure 46. Ultra DMA cycle timings (Device Terminating Read)
......................
Travelstar 48GH, 30GN & 15GN hard disk drive specifications
x
To Next Page
Loading...
