Chapter 3: Switch Management 33
3
Switch Management
About this chapter After you install and power on the switch, the switch boots and becomes
operational. This chapter provides information about accessing the switch
command-line interface and performing boot-menu functions.
For information about configuring switch features, see the CN1610 Network
Switch CLI Command Reference and the CN1610 Network Switch
Administrator’s Guide.
Topics in this
chapter
This chapter includes the following topics:
u “Accessing the management interface” on page 34
u “Boot process” on page 42
u “Startup Utility functions” on page 45
To Next Page
Loading...
Need help?
General