the keyboard. Figure 47 is an example of the menu.
Using the RAID application (Models xx4)
The Redundant Array of Inexpensive Disks (RAID) application supports 784, C84,
and E84 with one or two hard disk drives and the Microsoft Windows operating
system. RAID provides an error message if one of the two hard disk drives
experiences a failure.
Determining a hard drive failure (Models xx4)
When the RAID program indicates a hard drive failure, you can determine which
drive has failed using one of the following two methods:
Method one: Clicking the RAID icon
1. Select Start > Programs > Intel Matrix Storage Manager > Intel Matrix
Storage Console.
2. See Figure 48 on page 68 to determine which hard disk drive has failed, as
indicated by the drive and volume status.
Figure 47. Example of the RAID setup menu
Chapter 3. Problem determination 67
To Next Page
Loading...
Need help?
General
