v Using the Operator Control Panel: Control → Magazines
v Using the Web User Interface: Manage Library → Release Magazine
2.
Remove all magazines from the library.
3. Insert cartridges in the left magazine(s). Do not store cartridges in the I/O Station or in the dedicated
cleaning cartridge slot. Refer to the Setup, Operator, and Service Guide for more information.
4. Insert cartridges in the right magazine(s).
5. Put all magazines back into the library.
Inserting the Cleaning Cartridge
In a 4U library, the top slot of the right column of the lower left magazine is a dedicated cleaning slot
(DCS). This slot holds the cleaning cartridge.
In a 2U library, the cleaning cartridge can be placed in any storage slot.
With the Auto Clean feature enabled, a drive will be cleaned automatically when necessary.
Unlock the left cartridge magazines.
v Using the Operator Control Panel: Control → Magazines
v Using the Web User Interface: Manage Library → Release Magazine
v Remove the magazine from the library. In a 4U library remove the lower left magazine. In a 2U library
remove any magazine.
v Insert the cleaning cartridge. In a 4U library, insert the cleaning cartridge in the top slot of the back
column of the magazine (refer to the Setup, Operator, and Service Guide) In a 2U library insert the
cleaning cartridge in any storage slot.
v Push the magazine back into the library.
Installation 1-29
To Next Page
Loading...
Need help?
General
