Note: The illustrations in this document might differ slightly from your model.
The hot-swap server models support up to eight 2.5-inch hot-swap SAS/SATA hard
disk drives or three 3.5-inch hot-swap SAS/SATA hard disk drives. The simple-swap
server models support up to three 3.5-inch simple-swap SATA hard disk drives. The
following illustration shows the 2.5-inch hot-swap server models with an optional
optical drive bay.
The following illustration shows the 3.5-inch hot-swap or simple-swap server
models. The servers support up to three 3.5-inch hot-swap SAS/SATA or
simple-swap SATA hard disk drives.
If firmware and documentation updates are available, you can download them from
the IBM website. The server might have features that are not described in the
documentation that comes with the server, and the documentation might be updated
occasionally to include information about those features, or technical updates might
be available to provide additional information that is not included in the server
documentation. To check for updates, go to http://www.ibm.com/supportportal/.
Record information about the server in the following table.
Product name IBM System x3550 M4 server
Machine type 7914
Model number _____________________________________________
Serial number _____________________________________________
The model number and serial number are on the ID label on the front of the server,
as shown in the following illustration.
2 IBM System x3550 M4 Type 7914: Installation and User’s Guide
To Next Page
Loading...
Need help?
General