24
Inspection
The series of BETA 2 circulation pumps is used mainly in water circulation in boiler
central heating systems in houses.
The BETA 2 series circulation pump serves best in the following systems:
• Fixed-temperature heating system with variable ow
• Heating system with variable pipeline temperature
• Heating system with night mode
• Air conditioning system
• Industrial circulation system
• Home central heating.
The BETA 2 series circulation pump is equipped with a motor with permanent
magnets and pressure dierence regulator, which constantly and automatically
adapt the pump eciency to meet the actual needs of the system. The BETA 2
series circulation pump is equipped with a control panel on the top of the motor,
which makes it easier to use it.
Benets of installation of BETA 2 pumps. Ease of installation and launch
•
BTEA 2 series circulation pump has an auto-adaptation AUTO/ECO mode (factory
settings). In most cases, the pump can be launched without the necessity to intro-
duce any regulations and it can be automatically adapted to the current needs of
the system.
• High comfort of use
• Low noise level of the pump and the entire system
• Low power consumption
• Compared to the traditional circulation pump, power consumption of the BETA 2
series pump is very low and can reach even 5W, depending on the system.
To Next Page
Loading...
