The options at a glance
Your device might be equipped with one of the following options.
Option H
Option H is a higher accuracy in pressure measurement.
Please note that the sensor is not fluid resistant with this option.
Option identification is an H behind the product name, for example HDM97BQH.
Option C
Option C is a connector for the conductivity probe.
Please note that the probe is calibrated with the meter and cannot be used with other meters.
To use the probe with other meters a new adjustment of the temperature and conductivity is needed. After
these adjustments the meter will accept the probe in the future.
Option identification is a C behind the product name, for example HDM97BQC or HDM97BQHC.
To Next Page
Loading...
