IBP HDM97BQ - USB Interface and Driver Installation

Interface
38
PC Interface
USB Interface
The USB interface of the HDM97Pocket is electrically isolated from the appliance part. Two drivers are
needed for installation. One driver is made for invoking the interface like any other USB device and the other
driver is used to emulate a serial COM port device.
Interface parameters for serial COM port emulation
The HDM97Pocket uses the preset values below for serial COM port emulation:
Property
Value
Baud rate
9600 bps
Data bits
8
Parity
None
Stop Bit
1
Handshake
none